Substituir a almofada ocular Nikon DK-24

Quick Answer

Replace your worn or missing Nikon DK-24 eyepiece cushion with the Fotodiox Replacement Eyepiece – a soft, affordable rubber cup that restores comfortable viewing, especially for eyeglass wearers.

How to Replace the Nikon DK-24 Eyepiece Cushion

1. Remove the Old Cushion: Gently pinch the sides of the existing eyepiece cushion and slide it upward out of the viewfinder groove. If it's brittle, take care not to scratch the camera body. Common mistake: pulling at an angle can damage the groove – always lift straight up.
2. Align the Replacement: Hold the Fotodiox replacement eyepiece so the curved side faces the camera. Line up the tabs on the cushion with the slots inside the viewfinder frame. Checkpoint: make sure the rubber is not twisted before pressing it in.
3. Press into Place: Firmly but gently press the cushion down until it snaps into the groove. Run a finger around the edge to confirm it's fully seated and flush with the camera body. Common mistake: pressing too hard can deform the rubber – a firm, even pressure is enough.

Product Details

• Fotodiox Replacement Eyepiece - Eye Cushion for Select Nikon Cameras (Replaces DK-24): Precision design for perfect fit to your camera; allows soft eye contact; comfortable for users who wear eyeglasses. The soft rubber cushion reduces pressure around the eye and blocks stray light, making it easier to compose shots in bright conditions.