Confirm your housing before you mount anything
The WonderPana Go H3 kit is built for the original GoPro HERO3 Skeleton or Underwater Housing. It will not fit the HERO3+ or HERO4 Slimline cases. If you shoot with a HERO3+ camera, the supplied instructions note that HERO3 and HERO3+ cases are interchangeable, so you can attach the adapter to an original HERO3 housing instead.
This compatibility check is the most important step. The adapter screws onto the housing itself, so the housing model determines whether the kit works at all.
What the WonderPana Go H3 kit includes
- Fotodiox Pro WonderPana Go H3 Standard Kit - GoTough Filter Adapter System f/ GoPro HERO3 Skeleton or Underwater Housing with Three Filters (UV, CPL, ND8): Compatible with GoPro HERO3 Skeleton and Underwater Housing only; will not fit HERO3+ or HERO4 Slimline cases. Prevents a purchase that cannot be mounted on your current housing.

Fotodiox Pro WonderPana Go H3 Standard Kit - GoTough Filter Adapter System f/ GoPro HERO3 Skeleton or Underwater Housing with Three Filters (UV, CPL, ND8) - Fotodiox Pro WonderPana Go H3 Standard Kit - GoTough Filter Adapter System f/ GoPro HERO3 Skeleton or Underwater Housing with Three Filters (UV, CPL, ND8): Kit includes the WonderPana Go H3 filter adapter, UV, CPL, and ND8 filters, a three-filter carrying case, lens cap, and screwdriver. Shows exactly what you have on hand for the setup and storage.
- Fotodiox Pro WonderPana Go H3 Standard Kit - GoTough Filter Adapter System f/ GoPro HERO3 Skeleton or Underwater Housing with Three Filters (UV, CPL, ND8): Adapter is all-metal and screws onto the case; the case remains water tight and the adapter does not interfere with normal camera function. Confirms the mount is designed to stay on the housing without blocking camera use.
Mount the adapter and attach a filter
- Start with a clean, dry housing: The adapter screws onto the housing front. Make sure the housing lens area is free of grit so the mount seats cleanly.
- Screw the adapter onto the housing: Turn the all-metal adapter clockwise until it is snug. The supplied information describes a solid permanent mount; do not force it past snug.
- Choose your filter: The kit includes a UV protective filter, a circular polarizer (CPL), and an ND8 (3-stop) neutral density filter. Each screws onto the adapter's 53mm female thread.
- Thread the filter onto the adapter: Align the filter threads carefully and turn until finger-tight. Avoid over-tightening, which can make removal difficult.
- Check that the housing remains sealed: The product description states the case remains water tight with the adapter installed. Before any underwater use, inspect the housing seal as you normally would.
When to use each filter
The ND8 filter is for bright conditions, reducing light by three stops. Use it when you want slower shutter speeds or wider apertures in strong sunlight. The CPL filter manages reflections and can deepen skies; rotate it to taste. The UV filter is a clear protective layer for everyday shooting.
Because the adapter stays on the housing, you can swap filters as conditions change. The included lens cap protects the filter when the camera is not in use, and the carrying case keeps the spare filters secure.
What the supplied information does not cover
The record does not specify step-by-step torque, cleaning procedures for the glass, or whether the adapter affects the camera's waterproof rating beyond the statement that the case remains water tight. It also does not list supported filter sizes beyond the 53mm female thread. Treat these as open questions rather than assuming additional capabilities.
The kit is a single standard version; no other variants are listed. All pictures are for illustration only, so rely on the written compatibility notes.


