What This Stand Does
The Fotodiox 2.1m (7ft) Reflector / Background Stand with Clamp is designed to hold large collapsible backgrounds and reflectors vertically. The spring-loaded clip attaches to any pop-up frame smaller than 7ft (2m), and the stand itself can also double as a standard lightweight light stand when the clamp is removed.
Setting Up the Stand and Clamp
No tools are required for assembly. Follow these steps to get your background or reflector in place.
- 1. Extend the Stand Legs: Open the three legs of the stand and set it on a flat surface. The stand extends from a minimum height of 22in (56cm) up to a maximum of 84.5in (215cm). Adjust the center column to your desired height and lock it with the twist collar.
- 2. Attach the Clamp to the Stand: The clamp is included with the stand. Slide it onto the center tube at your preferred height. The stand tube diameters are 12mm, 16mm, 19mm, 23mm, and 26mm, so the clamp fits securely on any section.
- 3. Open the Spring-Loaded Clip: Pinch the clip handles to open the jaws. The easy pinch design lets you do this one-handed, so you don't need an assistant to hold the background.
- 4. Insert the Background or Reflector Frame: Place the edge of your collapsible pop-up frame (up to 5x7 in size) into the open clip. Release the handles to let the spring clamp grip the frame firmly. The clamp holds the screen vertically.
- 5. Adjust Position and Tension: If the stand feels loose over time, refer to the Fotodiox knowledgebase for instructions on tightening the light stand tension. The stand supports up to 10lbs (4.5kg) of load.
Key Specifications
- Fotodiox 2.1m (7ft) Reflector / Background Stand with Clamp for up to 5x7 Collapsible Backgrounds: Max height: 84.5in (215cm); Min height: 22in (56cm) The adjustable height lets you position the background for full-length or seated portraits.
Fotodiox 2.1m (7ft) Reflector / Background Stand with Clamp for up to 5x7 Collapsible Backgrounds - Fotodiox 2.1m (7ft) Reflector / Background Stand with Clamp for up to 5x7 Collapsible Backgrounds: Max load capacity: 4.5kg (10lbs) Ensures the stand can safely support most collapsible reflectors and fabric backgrounds without tipping.
- Fotodiox 2.1m (7ft) Reflector / Background Stand with Clamp for up to 5x7 Collapsible Backgrounds: Suitable for reflector panels of any size smaller than 7ft (2m) Confirms compatibility with common 5x7 and smaller pop-up frames; reflector not included.
Tips for a Stable Setup
Position the stand on a level floor and avoid overextending the center column beyond the recommended height if the background is heavy. The stand is made of anodized aluminum alloy and weighs 2.4lbs (1.08kg), so it's light enough to move easily but may need sandbags in windy outdoor conditions. The clamp holds the frame without tools, but you can also remove the clamp and use the stand as a standard light stand.
